Submitted by Conor (not verified) on Wed, 04/02/2008 - 09:09.
it looks like the PCB is 1/2 the thickness of the slot, why not make the board double sided (making the whole device remain inside the USB socket) hence it will only be possible to remove with tweezers...
the splinter in the toe of the PC.
--
Conor
USA 
Canada 
it looks like the PCB is 1/2
it looks like the PCB is 1/2 the thickness of the slot, why not make the board double sided (making the whole device remain inside the USB socket) hence it will only be possible to remove with tweezers...
the splinter in the toe of the PC.
--
Conor